A residential project is not able to meet the leakage requirements for ETS contr

admin

试卷: LEED v4 OM模拟题B卷英文[查看]
A residential project is not able to meet the leakage requirements for ETS control. How can the project team achieve the prerequisite?
住宅项目无法满足ETS控制的泄漏率要求。项目团队需要做什么来满足这一先决条件？
A: Demonstrate a 30% improvement over the most recent baseline leakage rate 与最近的基线泄漏率相比，有30%的改善
B: Show that each unit was re-sealed during the performance period在绩效期每个单元都被重新密封
C: Exclude the residential units that cannot meet the leakage requirements将无法满足泄漏率要求的住宅单元排除在外
D: Apply for an exception from the LEED reviewer 向LEED审核员申请豁免

参考答案: A

本题解释:
选择A，本题解释Residential only
Demonstrate on a regular basis (at least once every five years) a maximum leakage of 0.50 cubic feet per minute per square foot (2.54 liters per second per square meter) at 50 Pa of enclosure (i.e., all surfaces enclosing the apartment, including exterior and party walls, floors, and ceilings).
Projects that do not meet the leakage requirement may demonstrate a 30% improvement over the most recent baseline. The current measurement establishes the new baseline.