When performing a whole building simulation for Energy and Atmosphere Credit, Op

admin

试卷: LEED AP BD+C模拟题A[查看]
When performing a whole building simulation for Energy and Atmosphere Credit, Optimize
Energy Performance, can the process loads for the design case differ from the baseline case?
A: Yes, if the process loads will run off of renewable energy systems
B: Yes, if the process loads will run off of a central plant
C: No, the loads must always be identical
D: Yes, when project teams follow exceptional calculation method of ASHRAE 90.1 to document measures reduce process load

参考答案: D

本题解释:
Notes:


Reference: Energy and Atmosphere Credit, Optimize Energy Performance, Calculations, Option 1

The process loads can differ, but only when project teams follow the exceptional calculation method of ASHRAE 90.1-2007 to document measures that reduce process loads.


Certain energy components can be measured using the exceptional calculation method. See pg 275
of the NC reference guide for examples.


Waterfall pumps and escalators are types of process energy systems that must be modeled in the
baseline and design models.