第三方调试机构（Cx Agent）在项目的设计前阶段会做什么？

admin

试卷: LEED v4 BD+C中文模拟题（A）[查看]
第三方调试机构（Cx Agent）在项目的设计前阶段会做什么？ Which action would a third-party commissioning agent most likely take in the pre-design phase of a project?
A: 研究设施使用的参数 Research the assumptions regarding usage of the facility
B: 核实建筑师和工程师的设计满足业主项目要求（OPR） Verify that the architect’s and engineer’s designs meet the owner’s project requirements
C: 根据设计图纸和设计参数收集生产厂家产品样式和型号 Collect specific manufacturer makes and models for drawings and specs
D: 编写设计基础文件（BOD） Write the Basis of Design (BOD)

参考答案: B

本题解释:
答案:B
分析：B:调试方需要核实OPR,BOD以及项目设计。OPR由业主完成，BOD由设计院完成。The CxA needs to verify the OPR, BOD, and project design.
A:This is part of the BOD.
C:This is part of the BOD.
D:The BOD is ’the information necessary to accomplish the owner’s project requirements, including system descriptions, indoor environmental quality criteria, design assumptions, and references to applicable codes, standards, regulations, and guidelines.’ - USGBC

The CxA does not write this document.